Home > Products > Nickel > Nickel Bar
Nickel 200 round bar and rod to ASTM B160, UNS N02200. Custom diameters, cut lengths, surface finishes, MTC, PMI and inspection available for industrial projects.
Voyage Metal supplies Nickel 200 round bar and rod for chemical processing, caustic handling, electrical components and industrial fabrication where commercially pure wrought nickel, corrosion resistance and good thermal or electrical conductivity are required.
Nickel 200 is designated UNS N02200. Rod and bar are supplied to ASTM B160. Diameter, length, material condition, surface finish, tolerance, inspection and documentation requirements can be reviewed according to the project specification.
Quick RFQ: Send diameter × length, quantity, ASTM B160 material condition, surface requirement, tolerance or drawing requirements, inspection/documentation requirements and destination.
Non-standard dimensions are reviewed against manufacturing capability before quotation.
The table below summarizes the principal information normally required for Nickel 200 round bar procurement and quotation.
| Parameter | Specification / Supply Capability |
|---|---|
| Material | Nickel 200 / Alloy 200 |
| UNS Designation | N02200 |
| Product Standard | ASTM B160 — Nickel Rod and Bar |
| Product Form | Round bar / rod / cut-to-length solid bar |
| Diameter Capability | Ø1–450 mm (0.0394–17.717 in) |
| Single-Length Capability | Up to 12 m (472.441 in) |
| Material Condition | Hot-worked / cold-worked / annealed, as ordered |
| Surface Condition | Black / polished / turned / ground |
| Cutting | Cut-to-length available according to project requirements |
| Dimensional Requirements | Standard or project-specific requirements subject to dimensional and production review |
| Inspection | Dimensional and material verification; PMI, UT or third-party inspection can be arranged when specified and technically applicable |
| Documentation | MTC, heat-number traceability and EN 10204 3.1 documentation can be supplied when ordered |
| Pricing | Project-based quotation / customized |
Nickel 200 round bar can be reviewed across the following manufacturing range. These figures describe supply capability, not a live-stock commitment for every diameter and length combination.
0.0394–17.717 in. Dimensions within this range can be reviewed according to quantity, material condition, tolerance, surface requirement and manufacturing route.
ASTM B160 covers Nickel 200 (UNS N02200) rod and bar and includes requirements applicable to hot-worked and cold-worked material. The ordered material condition, dimensions and applicable mechanical requirements should be defined in the purchase specification.
For quotation, specify ASTM B160 together with diameter, length, quantity, required condition and any additional dimensional or inspection requirements.
Nickel 200 is commercially pure wrought nickel. The values below are limiting composition values for the alloy. Final supplied chemistry should be verified on the applicable material test certificate.
| Element | Content, wt.% |
|---|---|
| Nickel + Cobalt (Ni + Co) | 99.0 min. |
| Copper (Cu) | 0.25 max. |
| Iron (Fe) | 0.40 max. |
| Manganese (Mn) | 0.35 max. |
| Carbon (C) | 0.15 max. |
| Silicon (Si) | 0.35 max. |
| Sulfur (S) | 0.01 max. |
Mechanical properties vary significantly with processing condition. The values below are nominal reference ranges for Nickel 200 rod and bar, not universal purchase acceptance values.
| Rod / Bar Condition | Tensile Strength | 0.2% Yield Strength | Elongation |
|---|---|---|---|
| Hot-Finished | 415–585 MPa | 105–310 MPa | 35–55% |
| Cold-Drawn | 450–760 MPa | 275–690 MPa | 10–35% |
| Cold-Drawn Annealed / Hot-Finished Annealed | 380–520 MPa | 105–210 MPa | 40–55% |
Processing and inspection requirements should be confirmed before order placement so that the production route can be matched to the final machining or fabrication requirement.
Nickel 200 bar can be supplied in full production lengths or cut to project-specific lengths. Include finished length and quantity in the RFQ.
Black, polished, turned and ground surface options can be reviewed according to diameter, dimensional requirement and final application.
Diameter tolerance, straightness, end condition and other drawing requirements can be reviewed against the requested production route.
MTC, heat-number traceability, EN 10204 3.1 documentation and optional PMI, UT or third-party inspection can be arranged when specified at the order stage.
Nickel 200 is particularly useful where resistance to reducing chemicals, caustic alkalies, product contamination or the need for relatively high electrical and thermal conductivity are important design considerations.
Nickel 200 is widely associated with equipment and components used in suitable caustic and alkaline environments.
Round bar can be machined into solid components for chemical processing equipment where commercially pure nickel corrosion resistance is required.
Nickel 200 has been used where corrosion resistance and maintenance of product purity are important, including selected food and process-industry applications.
Its relatively high electrical and thermal conductivity makes Nickel 200 useful for selected electrical and electronic components.
Confirm ASTM B160, diameter, length, quantity and destination.
Review condition, surface, dimensional and inspection requirements.
Confirm material route, cutting and required surface processing.
Review dimensions, certification and specified inspection before release.
Prepare export packing according to bar dimensions and shipment method.
Nickel 200 round bar pricing depends on diameter, length, quantity, material condition, surface processing, tolerance, inspection, documentation, packing and destination.
Nickel market conditions can also affect raw-material cost. For a meaningful quotation, send the complete specification rather than relying on a generic price per kilogram.
Providing complete purchasing information helps reduce technical clarification time and improves quotation accuracy.
| RFQ Item | Example |
|---|---|
| Material | Nickel 200 / UNS N02200 |
| Standard | ASTM B160 |
| Diameter | Ø50 mm |
| Length | 3000 mm |
| Quantity | Piece quantity or total weight |
| Material Condition | Hot-worked / cold-worked / annealed |
| Surface | Black / polished / turned / ground |
| Dimensional Requirement | ASTM requirement or project drawing |
| Inspection / Documentation | MTC / EN 10204 3.1 / PMI / UT / third-party inspection, if required |
| Destination | Country, city or destination port |
ASTM B160 covers Nickel 200 (UNS N02200) rod and bar. The required material condition, dimensions and additional project requirements should be stated in the purchase specification.
Reference manufacturing capability covers Ø1 mm to Ø450 mm. Exact manufacturability and availability depend on diameter, quantity, material condition, surface requirement, tolerance and production route.
Reference single-length capability is up to 12 meters (472.441 in). Cut-to-length processing is also available.
Black, polished, turned and ground surface conditions can be reviewed according to the requested diameter, tolerance and final application.
Nickel 200 is normally limited to service below approximately 315°C (600°F). For prolonged exposure above this temperature, Nickel 201 is generally preferred because its lower carbon content reduces susceptibility to graphitization.
Material certification and heat-number traceability can be supplied according to order requirements. PMI, UT and third-party inspection can also be arranged when specified and technically applicable.
Pricing is project-specific and depends on diameter, length, quantity, material condition, surface processing, dimensional requirements, inspection, documentation, packing and destination.
Send diameter, length, quantity, ASTM B160 condition, surface requirement, dimensional requirements, inspection/documentation requirements and destination. Voyage Metal will review the specification before quotation.
Products Number: 2507 Super Duplex Stainless Steel Coil Supplier
Products Number: 2205 Duplex Stainless Steel Coil Supplier
Products Number: 304 & 316 Stainless Steel Supplier for Engineering Use
Products Number: High-End Corrosion & Heat Resistant Stainless Steel Supplier
Products Number: 301 / 304 / 304L / 316 / 316L / 309S / 310 / 321 Stainless Steel Bar & Rod
EN
